Descripción
This combo includes 18V LXT DTD153 battery-powered impact driver + BL 18V LXT 130Nm DHP486 combination drill + BL 18V LXT 5.0Ah 125mm DGA513 mini grinder + BL 18V LXT 24mm DHR243 light hammer + 3bat 5.0Ah + charger + 2 briefcases.
DTD153 FEATURES
- Light and compact, the power of an 18V with the body of a 12Vmax, BL brushless motor with 170 Nm of tightening torque.
- Aluminum casing to prevent excessive heating of the motor.
- One-action insertion without using tools to change tips.
- LED light to illuminate the work point, thus increasing the user's visibility.
- Ergonomic non-slip grip, covered with elastomer, the handle adapts perfectly to the hand for greater comfort and control.
- With belt hook
DTD153 SPECIFICATIONS
- Max capacity wood screws: 22-125mm
- Ipm: 0 - 3,600 ipm
- Max torque Tightening: 170 Nm
- Rpm: 0 - 3,400 Rpm
DHP486 FEATURES
- The maximum clutch torque is increased to be able to tighten screws in hard materials.
- Compact and ergonomic design only 178 mm long.
- 0-31,500 IPM for fast impact drilling in masonry.
- The BL brushless motor delivers 130 Nm of torque.
- The BL motor is electronically controlled to optimize battery power usage for longer run time per charge.
- The BL motor eliminates carbon brushes, prevents overheating and provides more efficient operation for longer life.
- 2 speeds (0-550 and 0-2,100 RPM) for a wide range of drilling, screwdriving and hammer drilling jobs.
- All-metal 13mm automatic drill chuck to improve the strength and durability of the bit.
- 21 clutch and drill mode settings for greater holding control.
- 3-stage LED indicator indicates battery charge level.
- Extreme Protection Technology (XPT) is designed to improve dust and splash water resistance for operation in harsh conditions.
- Dual LED lights with luminescence function illuminate the work area.
- Electric brake for maximum productivity.
- The reversible twist switch is conveniently located to be pressed with one finger.
- Automatic drill chuck for quick and easy installation of drill bits and bits.
- Depth stop for greater drilling consistency.
- Protection Circuit: Protects the battery from overcharging, overdischarging and overheating.
DHP486 SPECIFICATIONS
- Mechanical speeds: 2
- Low rpm: 0 - 550
- High RpmR.pm: 0 - 2,100
- RpmMax Torque hard joint tightening: 130 Nm
- Max torque soft joint tightening: 65 Nm
- Max torque clutch pressure: 1.0 - 12.0 Nm
- Max capacity in masonry: 16 mm
- Max metal capacity: 13 mm
- Max capacity in wood: 50 mm
- Torque positions: 21
- Chuck capacity: 1.5 - 13 mm
- Max torque stable tightening: 125 Nm
DGA513 FEATURES
- New range of 18V battery-powered mini grinders with 125 mm BL motor.
- Its BL brushless motor is more efficient, we reduce friction, motor heating and increase battery life.
- Rebound effect detection technology (AFT). Turn off the tool to protect the motor and prevent kickback if the rotation speed suddenly slows down.
- ADT system. Automatic speed control, The tool automatically changes the cutting speed adjusting to the workload for optimal operation.
- Electric brake, quickly stops the disc, avoiding risks to the user.
- Anti-restart system that prevents accidental start-up of the tool, thus avoiding possible accidents.
- With soft start function that minimizes the impact of starting.
- Variable speed by dial.
- Battery charge indicator, these LEDs also warn of overcharging and overheating by flashing clearly.
DGA513 SPECIFICATIONS
- Overload indicator: Yes
- Shaft lock: Yes
- Rpm: 3,000 - 8,500 Rpm
- Disc outer diameter: 125mm
- Disc inner diameter: 22.23 mm
- Electric brake: Yes
- Anti-restart system: Yes
DHR243 FEATURES
- BL brushless motor
- Capacity up to 24mm. The energy produced by the BL brushless motor is more efficient, increasing the productivity of the hammer.
- Three working modes, drill for wood and metal, drill + percussion for stone, concrete and percussion for small demolitions.
- With vertical motor, designed for the most demanding jobs.
- Possibility of fitting the new DX01 or DX02 suction adapters.
- Safety clutch that protects the motor from accidental engagement of the bit.
- The battery is separated from the machine thanks to a system of elastomers, we prevent vibration from reaching the battery.
DHR243 SPECIFICATIONS
- Rpm: 0 - 950 Rpm
- Preset chiselling positions: 40 positions
- Max capacity in concrete: 4 - 24 mm
- Max metal capacity: 13 mm
- Max capacity in wood: 27 mm
- Strokes per minute: 0 - 4,700 gpm
- Chuck capacity: 1.5 - 13.0 mm
INCLUDES
- 18V LXT DTD153 Cordless Impact Driver
- Combined drill BL 18V LXT 130Nm DHP486
- BL 18V LXT 5.0Ah 125mm DGA513 mini grinder
- Light hammer BL 18V LXT 24mm DHR243
- 3bat 5.0Ah
- Charger
- 2 briefcases.